Step 2 – Roll-Tex

Description : A water based Neoprene (chloroprene) rubber liquid dispersion polymer mixed with consistent vulcanized rubber texturing chips. Dries to a uniform 30 mil textured rubber layer.

Features : Step 2 – Liquid deck coating that is trowel applied with SPANTEX ROLL-TEX Applicator leaving behind a consistent flexible, tear resistance base coat when dried. It has excellent adhesion properties to plywood, wood, metal flashing’s and drip caps when used in conjunction with Step 1 Prime-it. Low VOC, environmentally friendly.

Uses : Applied as the Texture Coat for the SPANTEX coating system over the Step 1 Prime-it.

Category:

Product Description

Specifications

Odor: mild odor

Solids: 63.4% by volume

Packaged: 1 US Gal (3.78 L)

                  3 US Gal (11.36 L)

Composition: Neoprene based liquid dispersion polymer VOC: 48 g/L

Weight: 11.05 lb/US Gal

Characteristics: Texture Coat (base coat) in theSPANTEX coating system

Consistency: Viscous liquid

Interior or Exterior use: Interior and Exterior

Application method: Trowel with SPANTEX ROLL-TEX Applicator

Application Temperature: 10°C to 50°F no higher than 25°C to 80°F

Application Rate: 32 sq ft per 1 US gal per coat

Dry Touch Time: 4 hours @ 21°C (70°F)

Light Foot Traffic: Overnight (12 hours)

Clean up: Water

Shelf life: 4 years

Storage: Keep containers tightly closed. Introduction of any foreign object may

decrease storage life expectancy. Do not Freeze. Store in a warm dry location.

Reviews

There are no reviews yet.

Be the first to review “Step 2 – Roll-Tex”

Your email address will not be published. Required fields are marked *