Step 1 – Prime-It

Water based acrylic polymer emulsion primer. Used as Step 1 in the SPANTEX Deck Coating System.

Featuring excellent adhesion to wood, concrete, plywood, metals and SPANTEX Joint Filler. Fast dry, environmentally friendly VOC compliant with CCA and EPA.                  

Apply over all plywood, wood and metal flashings and drip edges to enhance greater adhesion to Step 2 SPANTEX ROLL-TEX. For optimal results apply Step 2 when PRIME-IT is dry but still tacky.

 

Category:

Product Description

Specifications

VOC: 102 g/L

Odor: Very mild

Solids: 26.7% by volume

Packaged: 1 US Gal (3.78 L)

3 US Gal (11.36 L)

Composition: Water based acrylic polymer emulsion

Weight: 8.46 lb/US Gal

Characteristics: Waterproof Primer used to prepare substate

to accept SPANTEX Roll-Tex. Dilutable with water, but becomes water-resistant when dry

Consistency: Viscous translusent green colour liquid

Interior or Exterior use: Interior and Exterior

Application method: Roller and brush

Application Temperature: 10°C to 32°C (50°F to 90°F)

Application Rate: 200 sq ft per 1 US gal per coat

Dry Touch Time: 1 hour @ 21°C (70°F)

Clean up: Water

Shelf life: 5 years

Storage: Keep containers tightly closed. Introduction of any foreign object may

decrease storage life expectancy. Do not Freeze

Reviews

There are no reviews yet.

Be the first to review “Step 1 – Prime-It”

Your email address will not be published. Required fields are marked *